 |
|
 |
|
 |
 |
 |
|
 |
|
|
 |
|
| |
|
 |
|
|
|
|
|
 |
| Onga Waterswitch Exceed Rainwater Controller |
Rainwater harvesting system
The NEW Onga WaterSwitch takes water saving solutions to a new age in innovation. Revolutionary technology merges with contemporary design to create a precision engineered, dependable product that recreates the industry benchmark for rainwater harvesting.
The Onga WaterSwitch is an automatic rainwater controller utilised in dual water source systems, where, rainwater is given priority for everyday applications such as your washing machine and toilets.
Your rainwater harvesting system is equipped with a pump and a mains water backup WaterSwitch. The pump is designed to give mains pressure and flow and to be matched to the water supply requirements within the house. The pump is designed to supply water to toilets, washing machines and outdoor taps. The WaterSwitch continuously supplies mains water in the event of a power failure or a pump failure.
Also provides convenient monitoring with the H2OInformer, the new state of the art, wireless interface module that records water usage for both mains and tank water so you can see your actual water savings from up to a 20 metre range
The new Onga WaterSwitch is also compliant to the latest WaterMark approval laws so you can be sure that this product has been independently tested and certified for your satisfaction.
|
 |
The following models are available in our Online Store:
• SMHW 450DR • SMHW 550DR • DW7535DR • DW7556DR |
 |
|
|
 |
|
| |
|
 |
|
| |
|
| |
|
Rainsaver MKIII |
 |
|
 |
|
A Revolution in Water Control
This is without doubt the best value tank to toilet/laundry system on the market. The Rainsaver MK111 controller can be wall or pump mounted, does not require electrical connection and will automatically divert to mains water when the tank runs dry and back to the tank when it rains again.
- Revolutionary Patented design, no mechanisms
- Requires no power supply and consumes NO electrical energy
- Designed to operate with pumps up to 800kpa (116psi)
- 100 litres per minute flow for large homes and commercial applications
- Aesthetically designed and requires no weather proofing
- Can be mounted any distance from the pump underground or inside a tank
- Barrel unions and “Torque Set” safety spanner are included to facilitate ease of servicing and to avoid tool damage or over tightening
- Completely waterproof can be hosed down without the fear of electrocution
- UV stabilized technopolymer for long life and good looks
- Modern ergonomic design along with a neutral colour does not detract from the look of your home
- All Rainsaver MKIII pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart
- WATERMARK approved for connection to all Town Water supplies. Safe against, water borne bacteria, dezincification and lead poisoning
- Auxiliary outlet allows for “energy saver” water storage – pressure vessels to reduce pump starts
- No unsightly controller power, water level float cables or the need for a dedicated controller power point
- Revolutionary “Mono Channel” design does not restrict flow or reduce pressures, eliminates any possibility of water leaks
- Easy to clean, pump and town water inlet strainers are included to prevent blockages in dishwashers, washing machines, sprinklers etc
- Australian owned and designed
- 4 Year Rainsaver Infield Warranty and 2 year pump warranty
|
|
 |
|
 |
|
Rainsaver MKIII Operation &
Installation Instructions
Rainsaver MKIII WaterMark
Certificate
Rainsaver MKIII Associated
Pumps WaterMark Certificate |
|
 |
|
 |
|
|
Surface Mounted Pump Packages
Rainsaver MK111 & Rainsaver MK111E (new electronic version)
|
|
Rainsaver MKIII & BIA-INOX60PCA
- Stainless Steel Electric Pump
- 4 taps
- 320kpa (Maximum Pressure)
- 36lpm@150kpa
- 4 year Rainsaver MK111E infield warranty &
2 year Bianco pump warranty
|
 |
|
The following model is available in our Online Store:
• MKIIIE & BIA-INOX60PCA |
|
 |
|
Rainsaver MKIII & BIA-MULTI900PCA
- Stainless Steel Multistage Electric Pump
- 9 taps
- 352kpa (Maximum Pressure)
- 80lpm@150kpa
- 4 year Rainsaver MK111E infield warranty &
2 year Bianco pump warranty
|
 |
|
The following model is available in our Online Store:
• MKIIIE & BIA-MULTI900PCA |
|
 |
|
Rainsaver MKIII & DAB-JETCOM82MAPCX
- Technopolymer Electronic Pump
- 6 taps
- 460kpa (Maximum Pressure)
- 60lpm@150kpa
- 4 year Rainsaver MK111E infield warranty &
2 year DAB pump warranty
|
 |
|
The following model is available in our Online Store:
• MKIIIE & DAB-JETCOM82MAPCX |
|
 |
|
| Submersible Pump Package |
|
Rainsaver MKIII & BIA-JH8003P
- High Head Submersible Clean Water Electronic Pump
- 8 taps
- 295kpa (Maximum Pressure)
- 80lpm@150kpa
- 10m Power Cable
- 4 year Rainsaver MK111E infield warranty &
2 year Bianco pump warranty
|
 |
|
The following model is available in our Online Store:
|
|
|
|
| NEW Rainsaver MK111E |
|
The NEW Rainsaver MK3E is an electronically operated automatic rainwater / mains water changeover device designed to provide automatic mains back up for Pressure Pump supply systems. The RainsaverMK3E changeover device supplies clean rainwater from a rainwater tank via an automatic pressure system pump to toilets, laundry and garden taps in a household. Mains water is also connected to the RainsaverMK3E as an automatic back up should rain water level be too low, or if there is a power or pump* failure. (*Should there be a pump failure, mains back up is achieved by turning the RainsaverMK3E off at the power point.)
The low voltage float switch supplied prevents the pump from running dry and allows automatic switch over to mains supply should the rain water level in the tank be too low.
KEY BENEFITS |


Rainsaver MK111E Install &
Operating Manual


|
|
- Electronically operated automatic rainwater bypass system
- Designed to operate with pumps up to 800kpa (116psi)
100 litres per minute flow for large homes and commercial applications
- Barrel unions and ‘Torque Set’ safety spanner included
UV stabilised technopolymer for long life
- All Rainsaver MK111E pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations , loss of water and incorporate a 24 hour automatic pump restart
- WATERMARK Level 1 Certification to ATS5200.477:2006 approved for connection to all Town Water supplies
- Revolutionary ‘Mono Channel’ design does not restrict flow or reduce pressures, eliminates any possibility of water leaks
- Auxiliary output allows for connection of pressure vessels to reduce pump starts
- Australian owned and designed
- Easy to clean pump and town water inlet strainers are included to reduce blockages
- 12V low voltage float switch
- 10 metre low voltage float switch cable
- 2 metre power lead
- 4 year Rainsaver MK111E infield warranty (applies to Rainsaver controller only)
- 2 year pump warranty
- Can be purchased separately and fitted to any brand of independently controlled , electronic or pressure switch operated pump
|
|
 |
|
Rainsaver MK111E - NEW
Automatic Rainwater/Mains Water Changeover Device The NEW Bianco Rainsaver MK3E is an electronically operated changeover device that automatically switches between tank water and the main supply. It can be fitted to an existing pump & pressure controller to give you mains backup.
MK111E Product Profile
The following model is available in our Online Store:
• BIA-RAINSAVER MK111E
|
 |
|
 |
|
Rainsaver MK111E Conversion Kit - NEW
Automatic Rainwater/Mains Water Changeover Device
with Presscontrol
This kit comprises of the Rainsaver MK111E and an automatic pump controller with auto restart.
- Designed for pumps up tp 800kpa (116psi)
- 100 litres per minute flow for large homes and commercial application
- Suitable for mains and pump flow to 100 litre per minute
- Plug and play connection
The following model is available in our Online Store:
• BIA-RS3ESK10A
|
 |
|


|
 |
|
MK111E Surface Mounted Pump Packages - NEW
|
|
Rainsaver MK111E & BIA-INOX60PCA - NEW
- Stainless Steel Jet Pump
- 4 taps
- 320kpa (Maximum Pressure)
- 36lpm
- 4 year Rainsaver MK111E infield warranty &
2 year Bianco pump warranty
The following models are available in our Online Store:
• RS3E-BIA-INOX60PCA • RS3E-ALLINONE60PC
|
 |
|
 |
|
Rainsaver MK111E & BIA-MULTI900CA - NEW
- Stainless Steel Multistage Pump
- 9 taps
- 352kpa (Maximum Pressure)
- 80lpm
- 4 year Rainsaver MK111E infield warranty &
2 year Bianco pump warranty
The following model is available in our Online Store:
• RS3E-MULTI900PC
|
 |
|

 |
 |
|
Rainsaver MK111E & DAB-JETCOM82MPCX - NEW
- Technopolymer Electronic Jet Pump
- 6 taps
- 460kpa (Maximum Pressure)
- 60lpm
- 4 year Rainsaver MK111E infield warranty &
2 year DAB pump warranty
The following model is available in our Online Store:
• RS3E-JETCOM82MPCX
|
 |
|
 |
|
Rainsaver MK111E & DAB-JINOX82MPCX - NEW
- Stainless Steel Jet Pump
- 6 taps
- 460kpa (Maximum Pressure)
- 60lpm
- 4 year Rainsaver MK111E infield warranty &
2 year DAB pump warranty
The following model is available in our Online Store:
• RS3E-JINOX82MPCX
|
 |
|
 |
|
Rainsaver MK111E & DAB-EUROINOX30/50 - MPCX NEW
- Stainless Steel Horizontal Multistage Pump
- 8 taps
- 413kpa (Maximum Pressure)
- 80lpm
- 4 year Rainsaver MK111E infield warranty &
2 year DAB pump warranty
The following model is available in our Online Store:
• RS3E-EUROINOX30/50MPCX
|
 |
|
 |
|
| N.B. OTHER PUMP COMBINATIONS ALSO AVAILABLE |
|
|
|
|
|
|
|
|