Effluent Pumps by Grundfos, Onga, Orange and Univeral for house and garden






Grundfos Unilift AP35/AP50
The AP35 and AP50 pumps are submersible pumps, specially designed for pumping wastewater and domestic sewage or any other non-aggressive liquid containing solid matter up to 50mm. They can be used as a fixed or mobile installation, vertically or horizontally (discharge outlet facing up).
Single-phase models supplied with float switch Motor cooling provided in all conditions by cooling jacket Solid handling capacity: 35mm for AP35 and 50mm for AP50 Easy service of power cable and float Pumped liquid temperature up to 70°C, for limited operating period (2 minutes per 30 second period).


Grundfos Unilift AP35B/AP50B
The AP35B and AP50B submersible pumps are specially designed for lifting domestic sewage or any other non-aggressive liquid containing solid matter up to 50mm. They can be installed vertically or horizontally. Lifting domestic wastewater from toilets etc.
Single-phase models supplied with float switch and standard electric plug Auto coupling available as an accessory for installation on a guide bar enabling positioning/removal of the pump from outside the hole Solid handling capacity: 35mm for AP35B and 50mm for AP50B Unique clip assembly system enabling immediate access to the impeller without disassembly tools Easy service of the power cable and float.


Grundfos Sololift
Sololift+ lifting stations are a practical and attractive solution for discharging domestic effluent that cannot reach the main sewage pipe directly.
The Sololift+ units grind and evacuate sewage and wastewater quickly - up to i litre per second - and automatically to a height of 5 metres and up to 100 metres from the main sewage pipe They are the ideal solution for rapid installment of an additional convenience and avoid costly or unattractive connections Wide range

Onga Sta-Rite Submersibles
This range of rugged cast iron submersible pumps is suitable for many dewatering, drainage, water treatment and sewerage applications. They come in three broad types, Vortex, Cutter and Grinder. They all feature dry motor design with automatic thermal overload protection and mechanical overload switch (Autocut). Available in six sizes to suit many applications.

Orange Grinder SP700G

Uses a hardened grinder blade so that oversize rubbish in the incoming water is reduced in size and does not clog the pump - capable of pumping a difficult mix of water and stringy solids.
Dirty water, screened sewage, sullage, storm water or pumping effluent from abattoirs, piggeries, etc. Can be used on applications that would clog most pumps.
Pump is designed for pumping long stringy items mixed with water.

Orange Cutter SPC700

Uses a hardened cutter plate so that large items in the incoming water are reduced in size and do not clog the pump - capable of pumping a difficult mix of water and solids.
Dirty water, sewage with small sanitary items, sullage, storm water or pumping effluent from abattoirs, etc. Can be used on applications that would clog most pumps.
Pump is designed for pumping large items mixed with water.

Home l  Pumps l  Rainwater Tanks   l  Irrigation  l  Pipes & Hoses  l  Filtration l  Fittings l  Valves & Taps l  Waste Water
Water Conservation Products l  About Us l  Specials l  Information l  Contact Us  l  Request a Quote l  Pump Sizing Form

PHONE: 07 3289 1888    l   FAX : 07 3289 2734   l   EMAIL: tcpumps@bigpond.com    l   ABN: 35 078 818 247

Copyright © 2008 - Design by emphasis